Maintenance strategy of automatic sliding gate motor

Maintenance strategy of automatic sliding gate motor

The theoretical understanding of automatic sliding gate should be an extension of the concept of automatic doors, which should be maintained in daily life.

1) The automatic sliding gate should keep the track clean to prevent foreign matter from entering. If there is debris and dust, it can be cleaned with a brush, and the dust in the groove and the gate seal can be sucked by a vacuum cleaner.

2) Maintain good operation performance of the sliding gate: The sliding gate looks simple, but there are still many structures and accessories. It is very important to remove the protection of the track and other aspects. The sealing top and glass sealant ensure the sealing, heat preservation and sound insulation of the sliding gate The key structure of the machine should be repaired and replaced in time if it falls off, so as to achieve the best effect of dust isolation, anti-collision, sound insulation and heat preservation.

3) The trademark and film on the surface of stainless steel should be washed with warm water and weak detergent, and the binder component should be scrubbed with alcohol or organic solvent ether and benzene.

4) Avoid using detergents, steel wire balls, abrasive tools, etc. containing bleaching ingredients and abrasives. To remove the detergent, rinse the surface with clean water after washing.