The working process and product features of the sliding door opener

A. Main process: door opening-door opening buffer-holding in place-door closing-door closing buffer-door lock.

B. Detailed process: The working process of the V-STARTER type automatic door opener/closer: the door open signal from the external device triggers the door opener to work — the electromagnetic lock is powered off — the door is opened — the door is opened buffer — the door is open — the door is closed — the door is closed — The electromagnetic lock is energized-the pressing door is closed; a work process ends.

Note: During the door closing process, if there is a door opening trigger signal, the door opening action will be executed immediately.

Product features of automatic door opener

l Low power consumption, static power 0.5W, high working power 25W;

l Quiet, the noise at work is less than 50dB; l Small size, easy to install;

l Powerful, can push 150KG door.

l Support multiple signal input, relay signal, voltage signal (5~24V),;

l Motor overcurrent, overload, and short circuit protection;

l Intelligent protection against obstacles and sliding door reversal;

l Motor current, thrust, speed adjustment;

l Magnetic induction limit, moisture-proof and dust-proof;

Environmental adaptability

Ambient temperature The door opener should be able to work normally at an ambient temperature of -20 ℃ ~ +50 ℃.

Anti-interference ability The door opener should be able to withstand the level 3 electrical fast transient pulse group immunity test specified in GB/T 17626.4-1998, and the level 3 oscillation wave immunity test specified in GB/T 17626.12-1998 During the test, there should be no malfunction during the test, and it should be able to work normally after the test is over.