Views: 0 Author: Stella Publish Time: 2026-03-09 Origin: Site
Motor overload
When the rolling door operator frequently starts and stops or runs for extended periods, the motor operates under continuous high load, causing a rapid rise in temperature. If heat dissipation is insufficient, it can trigger overheat protection and even burn out the coil. The risk is even higher in high-temperature environments or poorly ventilated installation locations.
Abnormal power supply voltage
Both excessively high and low voltage can affect the normal operation of the motor. Voltage imbalance (such as an abnormality in one phase of a three-phase power supply) will cause drastic current fluctuations, resulting in a current imbalance of 6-10 times, which will greatly accelerate the damage to the rolling door motor.
Mechanical obstruction
Dust accumulation, deformation, chain rust, or reel misalignment on the track can increase the motor load. If not cleaned or lubricated in time, the motor will have to be ‘forced to run’, which can easily lead to overcurrent and burnout.
Internal motor faults
Short circuit in the coil or aging insulation causing localized overheating; insufficient lubrication in the bearings causing rotor seizure and motor stall; broken brake disc or worn gears causing abnormal power transmission.
Lack of regular maintenance
Long-term neglect of cleaning the tracks, lubrication of moving parts, or ignoring loose screws can cause small problems to accumulate into big ones, eventually leading to motor overload and damage.
Installation or manufacturing defects
If the roller shutter motor is not securely fixed during installation, the coupling is not concentric, or a substandard motor with inherent design flaws is used, premature failure may also occur.
