Thyristor Module From the perspective of the chip, the thyristor module can be divided into a controllable module and a rectifier module. According to their specific use, they can be divided into: general-purpose thyristor modules (MTC thyristor modules/MTX), general-purpose rectifier modules (MDC r

整流桥的接线方法 桥式整流器的桥式连接方法：一端连接到桥式整流器，另一端和桥式电路另一侧的节点输入220 V电压。二极管的正极（两个二极管的正极的交点）输出直流正极。二极管的负极（两个二极管的负极的交点）输出直流负极。　　整流桥的四针连接：为了知道如何连接整流桥，首先要了解正负极性的全波整流桥电路。桥电路由四个整流二极管组成，通信电压在正负两个连接点输入。正极电压的输出端子连接在负极和负极之间，并在正极和正极之间接地。　　圆形或矩形整流桥的接线方法：如果形状是圆形桥或矩形方形桥整流器的全桥接线：其中有四个二极管。四个引脚，长引脚是直流输出的正极，另一端是直流输出的负极，其余两个是通信电压的输入

Bridge rectifier type and parameters selection principles 1. Bridge rectifier model.Bridge rectifier stack is generally used in the full-wave rectifier circuit, it is divided into full bridge and half bridge.Full bridge is composed of four rectifier diodes according to the form of bridge full-wave r

The concept of bridge rectifier and related knowledge The concept of bridge rectifierBridge rectifier is a rectifier tube enclosed in a housing. There are full bridges and half bridges. A full bridge is a connected bridge rectifier circuit with four diodes sealed together. A half bridge is a bridge

Factors of bridge rectifier damage Generally the heat sink is not large enough, the overload inrush current is too high and the heat is not dissipated. 1. Load short circuit, bad insulation. Caused by excessive load current. 2. Frequent starting and stopping of the power supply, if the inductive l

Common Bridge Rectifier Testing Methods 1. Test the rectifier circuit, find the p terminal and N terminal of the DC power supply inside the inverter, adjust the multimeter to resistance X10, connect the red pen to P and the black pen to R , S and T. The resistance value should be about a few tens of